Special functions
Software Update
Delete lists
Factory Reset
Receiver 1
Remote Control
Empfänger 1
Receiver 2
Select
Back
and confirm
SPECIAL SETTINGS
Selecting the remote control level
If you are operating two digital receivers with a the TP 766 S remote
control, you must enter a separate remote control level for each
digital receiver.
In the main menu, select »Installation« with »P-« or »P+« and
1
press »OK« to confirm.
2
Select »Special functions« with »P-« or »P+« and press »OK«
to confirm.
Select »Remote control« with »P-« or »P+« and press »OK« to
3
confirm.
4
Press »P-« or »P+« to select the remote control level
»Receiver 1« or »Receiver 2« and press »OK« to confirm.
– If you now want to use the digital receiver with remote control
level »Receiver 2«, you must first press and hold down »DR«
while pressing the button on the remote control with the
required function.
Press »i« to finish the setting.
5
______________________________
31