EURO AV 2
EURO AV 1
EURO AV 2
EURO AV 1
EURO AV 2
EURO AV 1
10
CONNECTION AND PREPARATION
Connecting an AV receiver or hi-fi system
Plug a standard cinch cable into the
1
VCR
»AUDIO OUT L
corresponding input sockets on the AV receiver or hi-fi system.
TV
Connecting a digital multi-channel amplifier
Plug a standard cinch cable into the
1
on the digital receiver and the corresponding socket on the digital multi-
VCR
channel amplifier.
TV
or
Plug a standard optical digital cable into the
socket on the digital receiver and the corresponding socket on the digital
multi-channel amplifier.
VCR
TV
Connecting the power cord
Plug the power cord supplied into the
1
socket on the digital receiver.
Plug the power cord into the wall socket.
2
Note:
Only
plug
the
connected the external devices and the antenna.
Inserting batteries in the remote control
Open the battery compartment by removing the lid.
1
Insert the batteries (Mignon type, for example UM-3 or AA, 2 x 1.5 V).
2
Observe the polarity (marked on the base of the battery compartment).
3
Close the battery compartment.
Note:
If the digital receiver no longer reacts properly to remote control com-
mands, the batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking
batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
»VIDEO
R« sockets (left/right) on the digital receiver and the
»DIGITAL AUDIO
device
into
the
mains
_________________
OUT« and
OUT« socket
»DIGITAL AUDIO
»220-240V~
50/60Hz«
socket
after
you
OUT«
have