Table of Contents
Advertisement
Special functions
Software Update
Delete lists
Factory Reset
Remote Control
Receiver 1
Select
Back
and confirm
Special functions
Software Update
Delete lists
Factory Reset
Remote Control
Receiver 1
Select
Back
and confirm
30
30
SPECIAL SETTINGS
Resetting the digital receiver to its original state
This function enables you to delete the station lists and all custom
settings.
1
In the main menu, select »Installation« with »P-« or »P+« and
press »OK« to confirm.
Select »Special functions« with »P-« or »P+« and press »OK«
2
to confirm.
Restore
Select »Factory Reset« with »P-« or »P+« and press »OK« to
3
Cancel
confirm.
Press »P-« or »P+« to select »Restore« and press »OK« to
4
confirm.
5
Press » « or » « to select »Yes« and press »OK« to confirm.
– All custom settings and station lists are deleted.
– The »Menu language« menu appears.
6
Reprogram the device as described on page 12.
Updating the digital receiver software
The receiver's digital technology enables you to update the
operating software. The digital receiver must be in standby mode.
In the main menu, select »Installation« with »P-« or »P+« and
1
press »OK« to confirm.
Select »Special functions« with »P-« or »P+« and press »OK«
2
to confirm.
3
Select »Software Update« by pressing »OK«.
Manual
Automatic
Press »P-« or »P+« to select one of the following settings:
4
No
– »Manual« – you must decide whether to save existing soft-
– »Automatic« – existing software updates are saved automati-
– »No« – the software is not updated.
Note:
An interruption during the downloading process (for example
by pulling out the mains plug) can damage the operating soft-
ware of the digital receiver.
Read the instructions in the menus carefully.
ware updates.
cally.
______________________________
Advertisement
Table of Contents
