Searching For Stations - Grundig DTR 2544 User Manual

Language
Deutsch Español
English Suomi
Français Svenska
Italiano Polski
Select
and confirm
Country
Germany Spain
Austria Finland
France Sweden
Italy Australia
Select Back
and confirm
Antenna supply
Off
On
Select Back
and confirm
12
SETTINGS
_________________________________________________

Searching for stations

The automatic search looks for receivable stations among the avail-
able bouquets of digital stations.
1 Switch on the digital receiver by pressing » « on the receiver.
– The »Language« menu appears when the device is first
switched on.
Select your language using »P-« or »P+« and press »OK« to
2
confirm.
– The »Country« menu appears.
Press »P-« or »P+« to select the country and press »OK« to
3
confirm.
– The »Antenna supply« menu appears.
Caution!
Only switch on the antenna voltage if the antenna is an active
indoor antenna with a signal amplifier with no power supply
of its own from a mains adapter or similar source. Otherwise
you may cause a short circuit and irreversibly damage your
antenna.
Press »P-« or »P+« to switch the antenna voltage on or off and
4
then press »OK« to confirm.
Caution!
If the message »Short circuit or overload at the antenna input«
appears, switch off the digital receiver immediately using the
power switch and rectify the problem. The antenna has an
excessive current consumption (max. 30 mA) or a short circuit.
– The »Search result« page appears and the station search
begins.
– The search is complete when the »Status« line contains the
message »Finished«.
Press »i« and then »OK« to save the settings.
5
Press » « or » « to select »Yes« (the stations are sorted before
6
being transferred to the station list) or »No« (the stations are
transferred unsorted to the station list) and press »OK« to
confirm.
– After sorting, the receiver switches to preset channel 1.
– You can change the order of preset stations as required and
delete stations you do not need (see page 13 "Editing the
station list").