Table of Contents
Advertisement
All key functions and basic settings can be carried
1
out using the TP 820 SAT universal remote control
unit.
2
The remote control unit can also be used to control
TV sets from GRUNDIG and many other makes (see
chapter on "Universal Remote Control" on page 6).
3
Several keys on the remote control have special
functions in the menu (see page 11).
4
Please insert the batteries supplied observing cor-
rect polarity! Markings on the base of the battery
compartment indicate this. Close the cover.
5
Please change used batteries promptly. We can
accept no liability for damage caused by leaking
batteries!
❒
Key Functions
b
Switch receiver to stand-by.
0
9
...
The required programme position is
selected directly by pressing the digit
keys, e.g. P 123.
When selecting a multi-digit pro-
gramme position, the digits are
entered in order from left to right. So,
in the example, you would enter 1, 2
and 3.
In this way you can select up to 250
SAT programme positions (SAT TV
and SAT radio).
– Switch receiver on from stand-by.
Switch through programme positions
step by step and switch on from
stand-by to the last programme posi-
tion selected (last station memory).
O
Display name of station on screen;
when in a menu: save.
– In SAT mode: alter volume (at very
low volume, "SAT Mute" is displayed
on the screen).
Display on-screen menu guide.
.
MENUE
¢
D
Without function
Exit menu (without saving).
¢
T XT
EXIT
¢
Select reception unit A or B.
A /B
TV-GUIDE
k
(red)
Function when in a menu.
h
(green) Display Timer menu.
j
(yellow)Switch between stereo, right and left
sound channel.
1
2
4
5
7
8
0
MENUE
SAT 1/TV SAT 2
VIDEO
TP 820 SAT
g
Switch between SAT-TV and SAT
RADIO
(blue)
radio mode.
™
– In TV mode*: alter contrast setting of
TV set.
®
– In SAT mode: display menu for picture
and sound improvements (see chapter
"Using the Receiver").
– In TV mode*: alter brightness setting of
TV set.
¢
TV mode*.
SAT 1/TV
Control of a TV set by pressing this
key and the desired function key simul-
taneously*.
¢
Control of a second SAT receiver
SAT 2
(IR level 2) by pressing this key and the
desired function key simultaneously*.
¢
Without function.
C
¢
Certain TV sets switch automatically
PERI
from terrestrial mode to AV mode
when the SAT receiver is switched on.
The
¢
key can be used to switch
PERI
the TV set back to terrestrial mode.
* See also chapter "Universal Remote Control" on
page 6.
3
6
9
TV-GUIDE
A/B
EXIT
TXT
RADIO
DX
PERI
5
Advertisement
Table of Contents
