Audio Settings; Sound Settings - Grundig DTR 2544 User Manual

Audio settings

English
Audio channel
Audio output Stereo
Volume adjustment
Digital output
PCM Format
Select Back
and open
Audio settings
Audio channel English
Audio output Stereo
Volume adjustment
Digital output
PCM Format
Select Back
and open
Audio settings
Audio channel
English
Audio output Deutsch
Volume adjustment
Digital output
PCM Format
Select Back
and confirm
18
SETTINGS
Audio settings
In the main menu, select »Settings« with »P-« or »P+« and
1
press »OK« to confirm.
2 Select »Audio« by pressing »OK«.
– The »Audio settings« menu appears.
Note:
Further operation is explained in the following sections.
Exit
Changing the audio channel of the television
With stations broadcasting in several languages you can select a
different language and digital sound (AC-3). The choice of audio
depends on the station and the current programme.
In radio mode, you can switch to other programmes.
1 Select »Audio channel« with »P-« or »P+« and then press
»OK«.
Press »P-« or »P+« to select the setting and press »OK« to
2
Exit
confirm.
Notes:
If you select digital sound (AC-3) for the audio channel, you
can no longer select »Audio output« and »Volume adjustment«.
Digital sound (AC-3) can only be played through an external
receiver or amplifier.
»Digital output« shows you the selected audio format at the
digital output, and cannot be selected.

Sound settings

Here you can select the audio mode, such as stereo, mono (left) and
mono (right).
Stereo
1 Select »Audio output« by pressing »P-« or »P+« and press
Mono (left)
»OK« to confirm.
Mono (right)
Press »P-« or »P+« to select the setting and press »OK« to
2
confirm.
*
Under license from Dolby Laboratories Licensing Corporation.
DOLBY and the Double-D symbol
Dolby Laboratories Licensing Corporation.
_________________________________________________
are registered trademarks of the