Table of Contents
Advertisement
Special functions
Software Update
Delete lists
Formate Hard Disk
Factory Reset
Remote Control
Receiver 1
Select
Back
and open
Special functions
Software Update
Delete lists
Formate Hard Disk
Factory Reset
Remote Control
Select
Back
and open
42
SPECIAL SETTINGS
Formatting the hard drive
This function deletes all the stations in the archive.
1
In the »Main Menu«, select »Installation« with »P-« or »P+«
and confirm with »OK«.
Select »Special functions« with »P-« or »P+« and press »OK«
2
to confirm.
Select »Format Hard Disk« with »P-« or »P+« and confirm with
3
»OK«.
Exit
Note the security queries.
4
Press » « or » « to select »Yes« and press »OK« to confirm.
Selecting the remote control level
If you are operating two digital recorders with the TP 767 S remote
control, you must enter a separate remote control level for each dig-
ital recorder.
In the »Main Menu«, select »Installation« with »P-« or »P+«
1
and press »OK« to confirm.
Select »Special functions« with »P-« or »P+« and press »OK«
2
to confirm.
Receiver 1
3
Select »Remote Control« with »P-« or »P+« and press »OK«
Receiver 2
to confirm.
Press »P-« or »P+« to select the remote control level
4
»Receiver 1« or »Receiver 2«.
Confirm the setting by pressing and holding down »DR« and
5
then press »OK«.
– If you now want to use the digital recorder with remote con-
Press »i« to finish the setting.
6
trol level »Receiver 2«, you must first press and hold down
»DR« while pressing the button on the remote control with the
required function.
______________________________
Advertisement
Table of Contents
