Searching For Stations - Grundig DTR 1560 MICRO User Manual

BASIC SETTINGS

Searching for stations

The automatic search looks for receivable stations among the
available bouquets of digital stations.
1 Press » « to switch on the digital receiver.
– The »Erstinstallation« (Initial installation) page appears when
the device is first switched on.
2 Press »OK« to start initial installation.
3 Select your language using » « or » « and press »OK« to
confirm.
– The »Settings« menu appears.
4 Select the country with » « or » «.
5 Select »Screen Format« by pressing »P+« or »P-« and then
press » « or » « to select the format.
Select the »TV Output Format« line with »P+« or »P-« and
6
press » « or » « to select the video signal.
7 Select »Active Antenna« with »P+« or »P-«.
Caution!
Only switch on the antenna voltage if the antenna is an active
indoor antenna with a signal amplifier with no power supply of
its own from a mains adapter or similar source. Otherwise
you may cause a short circuit and irreparably damage your
antenna.
8 Press » « or » « to switch the antenna voltage on or off.
Caution!
If »Antenna short circuit« appears on the screen, switch off the
digital receiver and remove the cause. The antenna has an
excessive current consumption (max. 30 mA) or a short circuit.
Select »Apply« with »P+« or »P-« and press »OK« to confirm.
9
– The »Automatic Search« menu appears.
– You can retain the values for the start and end frequency.
– Select the »All« option in »Channels to search for« if you
would also like to receive encoded stations.
________________________________________
11