RAM 3500 2012 User Manual page 26

OPERATING YOUR VEHICLE
• Once a speed is set, pushing the RESUME/ACCEL switch once or the DECEL
switch once will increase or decrease the set speed approximately 1 mph
(2 km/h).
Resume
• To resume a previously selected set speed in memory, push the RESUME/
ACCEL switch and release.
Cancel
• Push the CANCEL switch or apply the brakes to cancel the set speed and
maintain the set speed memory.
• Push the ON/OFF switch to turn the system off and erase the set speed
memory.
• Leaving the Electronic Speed Control system on when not in use is
dangerous. You could accidentally set the system or cause it to go faster
than you want. You could lose control and have a collision. Always leave
the Electronic Speed Control system off when you are not using it.
• Electronic Speed Control can be dangerous where the system cannot
maintain a constant speed. Your vehicle could go too fast for the
conditions, and you could lose control. A collision could be the result. Do
not use Electronic Speed Control in heavy traffic or on roads that are
winding, icy, snow-covered or slippery.
24
WARNING!