Hardware Installation; Connecting Via A Cable; Connecting Wirelessly; Telephone Setup - NetComm NB16WV-02 User Manual

Hardware installation

1. Connect the power adapter to the Power socket on the back of the NB16WV-02.
2. Plug the power adapter into the wall socket and switch on the power.
3. Wait approximately 60 seconds for the NB16WV-02 to power up.

Connecting via a cable

1. Connect the yellow Ethernet cable provided to one of the ports marked 'LAN' at the back of the NB16WV-02.
2. Connect the other end of the yellow Ethernet cable to your computer.
3. Wait approximately 30 seconds for the connection to establish.
4. Open your Web browser, and enter
5. Follow the steps to set up your NB16WV-02.

Connecting wirelessly

1. Ensure Wi-Fi is enabled on your device (computer/laptop/Smartphone).
2. Scan for wireless networks in your area and connect to the network name that matches the Wireless network name
configured on the NB16WV-02.
Note: Refer to the included Wireless Security Card for the default SSID and wireless security key of your NB16WV-02
3. When prompted for your wireless security settings, enter the Wireless security key configured on the NB16WV-02.
4. Wait approximately 30 seconds for the connection to establish.
5. Open your Web browser, and enter
6. Follow the steps to set up your NB16WV-02.

Telephone Setup

1. Insert the RJ-11-to-RJ-11 cable that comes delivered with your telephone into the FXS Phone Port (RJ-11) of the NB16WV-
02.
2. Make sure the other end of the cable is plugged firmly into the RJ-11 port of your telephone.
3. Follow the steps to setup your VoIP account details.
NetComm Wireless NB16WV-02 User Guide
13
http://192.168.20.1 into the address bar and press enter.
http://192.168.20.1 into the address bar and press Enter.
www.netcommwireless.com