Nas Settings - NetComm NB16WV-02 User Manual

NAS Settings

The NAS Settings page enables you to configure the network area storage (NAS) function of the NB16WV-02. This function can
be used to remotely access files stored on an attached USB hard drive. Click on any of the menu items to access the respective
configuration page.
Disk Utility
The Disk Utility function enables you to check any attached USB storage for errors. The NB16WV will scan the attached storage
and determine if there are any file system errors present. File System errors can prevent you being able to access stored content.
You can also format (erase) any attached storage if needed. Simply click the appropriate button to perform either task.
File Sharing
The File Sharing function enables the NB16WV-02 to take part in a Windows networking environment. Once configured, the
attached USB Storage can be viewed from Windows by typing:
\\<Configured Name of the NB16WV-02>\Storage\
Files can then be dragged and dropped onto the attached USB storage.
OPTION
Network Attached Storage Name
WorkGroup
Server Comment
The File Sharing configuration also enables you to enable the built-in FTP server function and the associated settings:
OPTION
FTP
FTP Port
FTP Max Connections per IP
FTP Max Clients
Client Support UTF8
www.netcommwireless.com
Enter the computer name the NB16WV is to use on the network.
Enter the network workgroup the NB16WV is to be a member of.
Enter the comment to be displayed when a list of network hosts is shown.
Select to enable or disable the FTP server function.
Enter the network port the FTP server should run on.
Enter the maximum number of concurrent connections which can be used by a particular IP address.
Enter the maximum number of clients which can connect to the FTP concurrently.
Enable Unicode support for connected clients.
DEFINITION
DEFINITION
NetComm Wireless NB16WV-02 User Guide
74