Powerline Utility - NetComm NP504 User Manual

Powerline Utility

Note: The Powerline utility is downloadable from the NetComm website. Please go to www.netcommwireless.com and navigate to
the product page to download.
Powerline Utility is a software application that allows you to configure the Powerline Adapters. It is mainly used for changing the
Private Network Name, detecting other Powerline Adapters in the network, and measuring the throughput of devices. Installation is
straightforward and the user interface is easy to use.
Note: To use Powerline Utility, you need a computer using a Windows operating system with the .NET Framework installed. If you
do not have .NET installed, the Powerline installer will installer it for you.
Requirements
Your computer must meet the following requirements:
Windows 98SE, ME, 2000, XP (32 and 64 bit), Vista (32 and 64 bit) or 7 (32 and 64 bit)
300 MHz Processor
128 Mb of RAM
.NET Framework
Network Interface Card
128 Mb of free hard disk space
Opening Powerline Utility
There are two ways to open Powerline Utility:
Double-click the Powerline Utility desktop shortcut and then select Open.
Click the Start button, click Programs, and then click the Powerline Utility icon.
500Mbps Powerline Adapters with AC Passthrough
10
www.netcommwireless.com