Table of Contents
Advertisement
Installation
Connecting the USB Adapter
To connect the USB Adapter, perform the following steps:
1.
Turn on your PC and start Windows.
2.
Insert the USB adapter into the PC's USB port. If the power indicator remains steady on, the USB adapter is
connected to the PC correctly.
3.
Windows will automatically detect the USB adapter when it is inserted and should install the required driver.
Installing the Driver and Configuration Utility
In the case where your computer does not automatically install the driver for the USB adapter, you may need to manually
install it. Please visit the Downloads section of the product page on the NetComm Wireless website to download the driver.
www.netcommwireless.com/product/wifi/NP920
Note: This USB Adapter does not work with any Mac operating systems. All recent Macs have dual band WiFi built-in as a
feature.
1.
Download the appropriate zipped driver folder from the NetComm Wireless website to your computer.
2.
Right click on the folder and select the Extract To option, choosing a location to extract the files to.
3.
Navigate to the folder you extracted the files to and double-click on Setup.exe. The InstallShield Wizard is
displayed. Click Next > to continue.
4.
The InstallShield Wizard installs the driver and when it is finished, it prompts you to restart your computer. Select
Yes, I want to restart my computer now and click Finish.
Advertisement
Table of Contents
