radio on/off
to disable your wireless network, click on the [radio on/off] tab. this will cease radio transmission between your NetComm ���n Series
USB Adapter and your wireless Access Point/router. to enable your wireless network, simply click on the [radio on/off] tab again.
the status can be easily checked by the colour of the symbol in the [radio on/off] tab. Green indicates that your wireless network is
enabled, while red indicates that your wireless network is disabled.
About
the About tab displays version information of
•
Utility Version
•
Driver Version
•
eeProm Version
•
Firmware Version
•
mAC address of the PHY
Uninstalling NetComm Utility/Driver
to Uninstall the NetComm ���n Series Utility follow the steps below
•
open the [Start] menu
•
Select [All Programs]
•
Select [NetComm Wireless]
•
Select [Uninstall – NetComm 900n Series Wireless USB Adapter]
You can see the wizard preparing for uninstallation. Click on [Yes], to continue the uninstallation process.
Wireless N USB Adapters User Guide
4
YmL���WN
YmL���WN
���WN
www.netcomm.com.au