Table of Contents
Advertisement
SOFTWARE INSTALLATION
This section will lead you to install the driver and utility of the Wireless USB 2.0 Adapter.
Windows 98se/ME/2000/XP Utility and Driver Installation
1. Insert the Utility CD-ROM into your computer's CD-ROM Drive. It will automatically run
a setup menu and install the driver and the utility. For Win98se, please reboot the system to
install the driver properly.
2. In some cases, you may need to run the software utility manually. Go to your Windows
Start menu and choose Run, type "D:\Utility\Setup.exe" in the dialog box and click OK.
3. If you need to install the driver manually, refer each Windows OS to the following CD-
Rom directory path: D:\Drivers\<Windows OS>\SIS163U.INF. Note: D:\ will depends on
where the CD-ROM drive is located and <Windows OS> will depend on the Windows
Operating System you are using.
4. The InstallShield Wizard screen will appear. Click Next to continue.
5. The installation program will help you to setup the Wireless Utility.Note: Windows XP has
its own Wireless Utility; you can either use the utility or the one provided with Windows.
6. After the installation is finished, plug in the Adapter. The Wireless Configuration Utility
Country Selector will appear. Please ensure that you select the appropriate region.
.
3
Advertisement
Table of Contents
