Ac Pass-Through; Package Contents; Device Design - NetComm NP504 User Manual

AC Pass-through

With built in AC pass-through, you are conveniently able to use the same power point to plug in other electrical appliances. All you
have to do is connect the electrical appliance into the built-in pass-through socket and it will have power as if it was connected
directly into the wall. This will eliminate the need to connect your Powerline Adapter to a power board which will improve your
networking performance.

Package Contents

The package contains the following items:
2 Powerline Adapters
2 Ethernet cables
Quick Start Guide

Device Design

LABEL
Simple Connect Button
Power
Powerline Activity
Ethernet Activity
Ethernet Port
Reset Button
www.netcommwireless.com
STATUS
Press to create or join a Powerline network. It can also be used to reset the Private Network
Name to a random key.
Off No power.
After Simple Connect is pressed for two seconds, this LED will blink to confirm the button
press.
On
When Simple Connect is pressed for at least 10 seconds, this LED will blink to confirm the
Private Network Name reset.
Off Device is not connected to a Powerline network.
This LED remains on when the device is part of a Powerline network.
The LED colors represents the connection rate within the Powerline network whether it is
On
good(red), better (amber), or best (green).
The LED flashes to indicate network activity.
Off An Ethernet device is not connected.
An Ethernet device is connected.
On
The LED flashes to indicate Ethernet activity.
Accepts either cross or straight Ethernet cable.
Press for 2 seconds to reset to the factory default settings. When you reset to the factory
default, all your configuration changes will be removed.
DESCRIPTION
500Mbps Powerline Adapters with AC Passthrough
5