Protocol-Vlan Vlan - TP-Link T1600-28TS Cli Reference Manual

Example
Create a Protocol-based VLAN template named "TP" whose Ethernet
protocol type is 0x2024:
T1600G-52TS(config)#protocol-vlan template name TP frame ether_2
ether-type 2024

5.2 protocol-vlan vlan

Description
The protocol-vlan vlan command is used to create a Protocol-based VLAN.
To delete a Protocol-based VLAN, please use no protocol-vlan command.
Syntax
protocol-vlan vlan
no protocol-vlan vlan
Parameter
vlan-vid
template-idx
get the template corresponding to the number by the
template
group-idx
the Protocol-based VLAN entry corresponding to the number by the
protocol-vlan vlan
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create Protocol-based VLAN 2 and bind it with Protocol-based VLAN
Template 3:
T1600G-52TS(config)# protocol-vlan vlan 2 template 3
vlan-id
{ template
group-idx
—— Specify IEEE 802.1Q VLAN ID, ranging from 1-4094.
——The number of the Protocol-based VLAN Template. You can
command.
——The number of the Protocol-based VLAN entry. You can get
command.
template-idx
}
32
show protocol-vlan
show