Operating The Audio Processor; Battery Replacement; Controllable With Remote Control; Connectable To Remote Control Interface Box - Alpine CDA-137BTI Owner's Manual

 Audio Processor Button
Each press of the button changes the audio processor mode.
For details, refer to "Operating the Audio Processor" as shown below.
Press the button to activate the external audio processor mode when
the external audio processor is connected.
For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased. When the
IMPRINT audio processor (PXA-H100) (sold separately) is
connected, refer to "IMPRINT Operation (optional)" on page 38.
 Power Button
Press this button to turn the power on/off.
 Band Button
Radio mode:
BAND Button.
Press this button and the band will change.
Changer mode:
To switch the changer.
  UP Button
Radio mode:
SEEK (UP) button.
CD/iPod mode:
Press this button to advance to the beginning of the next track.
  Button
Radio mode:
Pressing this button will select, in descending order, stations
programmed into the radio's presets as shown below.
   ...   
CD Changer mode:
DISC Select (DN) button.
Press this button to select a disc in descending order.
MP3/WMA/AAC mode:
Folder Select (DN) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (DN) / DISC Select (DN) button.
Press this button to select a folder in descending order.
Press and hold this button to select a disc in descending order.
iPod mode:
Switches Playlist/Artist/Album/Genre/Composer.
 Mute Button
Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.

Operating the Audio Processor

1
Press A.PROC to select the mode.
Normal mode  Time Correction  X-OVER  Normal mode
2
Press  or  to select the item.
Time Correction mode/Crossover (X-OVER) mode:
Select from MEMORY 1 through 6.

Battery Replacement

*
1
2
3

Controllable With Remote Control

Connectable to Remote Control Interface
Box
Opening the battery cover
Slide out the battery cover while firmly pressing in the direction
of the arrow.
Replacing the battery
Insert the batteries, observing the polarities as illustrated.
Closing the cover
Slide the cover as illustrated until a click is heard.
Remote control sensor
47
-EN