Priority News; Displaying Radio Text; Cd/Mp3/Wma/Aac; Playback - Alpine CDA-137BTI Owner's Manual

Cd receiver with advanced bluetooth
Table of Contents

Advertisement

3
Press and hold BANDTA for at least 2 seconds to
deactivate the Traffic Information mode.
The "TA" indicator goes out.

Priority News

1
Press the Rotary encoder to activate the FUNCTION LIST
mode while the unit is in Radio (FM receiving) mode.
2
Turn the Rotary encoder to select the News, then press
ENTER.
AF  NEWS  PTY  FREQ Search
Note
• In the NEWS function, unlike in the TA function, the volume does not
increase automatically.
3
Turn the Rotary encoder to select ON or OFF.
4
Press and hold  for at least 2 seconds to return to
normal mode.

Displaying Radio Text

Press VIEW while receiving FM in the radio mode to select
the Radio Text display.
The display will change every time the button is pressed.
For details, refer to "Displaying the Text" on page 20.
14
-EN

CD/MP3/WMA/AAC

SOURCE/
Rotary encoder
y
/ENTER
/ II
VIEW

Playback

1
Press y (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
• When a disc is already inserted, press SOURCE to switch to the
DISC mode.
3
While playing back MP3/WMA/AAC, press 1  or  2 to
select the desired folder.
Pressing and holding 1  or  2 will change folders
continuously.
4
Press  or  to select the desired track (file).
Pressing and holding  or  will fast backward/fast
forward track continuously.
5
To pause playback, press .
Pressing  again will resume playback.
6
After pressing y (OPEN) to open the front panel, press 
to eject the disc.
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
• Three-inch (8 cm) CDs cannot be used.
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• Press VIEW to switch the display. For details, refer to "Displaying the
Text" on page 20.
1
2
4 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents