Alpine CDA-105Ri Owner's Manual

Mp3/wma/aac cd receiver

Hide thumbs Also See for CDA-105Ri:

Quick reference manual (20 pages)

Quick installation manual (15 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for Alpine CDA-105Ri

Page 1 Si prega di leggere prima di utilizzare il Παρακαλ ύμε δια άστε τ πριν attrezzatura. ρησιμ π ιήσετε τη συσκευή. ALPINE ELECTRONICS MARKETING, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ITALIA S.p.A. 1-1-8 Nishi Gotanda, 161-165 Princes Highway, Hallam Viale C. Colombo 8, 20090 Trezzano...
Page 3: Table Of Contents
ENGLISH Contents CD/MP3/WMA/AAC Playback ............11 Repeat Play ............. 12 Operating Instructions M.I.X. (Random Play) ........12 Searching for CD Text ........12 WARNING File/Folder Name Search (concerning MP3/WMA/AAC) ....13 WARNING ..........3 Quick Search ........... 13 CAUTION ..........3 About MP3/WMA/AAC .........
Page 4 Blackout Mode On and Off ......28 MP3/WMA/AAC Sound Field Adjustment Playing MP3/WMA/AAC Data (SOUND ADJUST) ........28 (PLAY MODE) ..........20 Adjusting the Parametric Equalizer Curve ..28 Adjusting the Graphic Equalizer Curve ...28 External Device Adjusting the Time Correction ......28 Connecting to an External Amplifier ....20 Adjusting the Crossover Settings .....28 Setting Adaptive Steering Remote Control ..
Page 5: Operating Instructions
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. or death. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Page 6 We recommend not using these accessories on discs played in Alpine Centre Hole Centre Hole CD players.
Page 7 • The Bluetooth word mark and logos are owned by the Bluetooth MP3/WMA/AAC. SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is • Artist/song name, etc., can be displayed, however characters under license. Other trademarks and trade names are those of may not be correctly displayed.
Page 8: Getting Started
Grasp the front panel firmly, slide to the left , and Getting Started then pull to remove. (OPEN) MUTE • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction.
Page 9: Initial System Start-Up
10 seconds, the indicator goes out. Adjusting Volume Controllable with Remote Control This unit can be controlled with an optional Alpine remote Turn the Rotary encoder until the desired sound is control. For details, consult your Alpine dealer. obtained.
Page 10: Radio
Radio Presetting Stations Automatically Press BAND/TA repeatedly until the desired radio SOURCE/ Rotary encoder /ENT band is displayed. TUNE/A.ME BAND/TA Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band.
Page 11: Rds
Recalling Preset RDS Stations Press F/SETUP so that the indicator lights up. Rotary encoder /ESC BAND/TA /ENT Press 1 AF to activate the RDS mode. Press F/SETUP to activate the normal mode. indicator goes out. Make sure that the indicator light goes out, then press the preset button in which your desired RDS station is preset.
Page 12: Pi Seek Setting
• If the traffic information broadcast signal falls below a certain level, PI SEEK Setting the unit remains in the receiving mode for 1 minute. If the signal remains below a certain level for over 1 minute, the “TA” indicator blinks.
Page 13: Priority News
When traffic information stations cannot be received: CD/MP3/WMA/AAC In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. SOURCE/ Rotary encoder /ESC • The receiver is equipped with the EON (Enhanced Other Networks) /ENT (OPEN) function in order to keep track of additional alternate frequencies to...
Page 14: Repeat Play
To pause playback, press When an MP3 compatible CD changer is connected. Pressing again will resume playback. • If a CD changer or an MP3 compatible CD changer is connected: After pressing F/SETUP to select the function mode ( After pressing (OPEN) to open the front panel, perform the operation within 10 seconds.
Page 15: File/Folder Name Search (Concerning Mp3/Wma/Aac)
File/Folder Name Search About MP3/WMA/AAC (concerning MP3/WMA/AAC) CAUTION Folder and file names may be searched and displayed during playback. Except for private use, duplicating audio data (including MP3/ WMA/AAC data) or distributing, transferring, or copying it, During MP3/WMA/AAC playback, press /ENT to whether for free or for a fee, without permission of the copyright activate the search mode.
Page 16 Supported playback sampling rates and bit rates This device cannot correctly play back discs recorded with Track At Once or packet writing. Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, Order of files 16 kHz, 12 kHz, 11.025 kHz, 8 kHz Files are played back in the order that the writing software writes Bit rates: 8 - 320 kbps...
Page 17: Sound Setting
Sound Setting Setting the Subwoofer Level You can change the Subwoofer Level to create your own tonal preference. SOURCE/ Rotary encoder (AUDIO/LOUD) BAND/TA /ENT Press SOUND SETUP to activate the Sound Setting mode. Turn the Rotary encoder to select the SUBW LEVEL Adjustment mode, and then press /ENT.
Page 18: Setting The Bass Level
The adjustment can also be made by pressing Rotary encoder Setting the Bass Level (AUDIO). Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 15). Turn the Rotary encoder to select the desired bass level (–7~+7).
Page 19: Turning Subwoofer On/Off
Turning Subwoofer ON/OFF Turning Loudness On/Off When the subwoofer is on, you can adjust the subwoofer output level Loudness introduces a special low- and high-frequency emphasis at low (refer to page 15). listening levels. This compensates for the ear’s decreased sensitivity to bass and treble sound.
Page 20: Other Functions
ID3 tag/WMA tag Other Functions If an MP3/WMA/AAC file contains ID3 tag/WMA tag information, the ID3 tag /WMA tag information is displayed (e.g., song name, artist name, and album name). All other tag data is ignored. If the TEXT SCROLL (page 20) is set to “SCROLL AUTO”, the tag information will scroll automatically.
Page 21: Setup
BLUETOOTH IN SETUP Setting the Bluetooth Connection You can flexibly customize the unit to suit your own preferences and BT IN ADAPTE / BT IN OFF (Initial setting) usage. From the SETUP menu, Sound Customizing, Visual If an optional Bluetooth INTERFACE (KCE-400BT) is connected, you Customizing, etc.
Page 22: Scroll Type Setting
Scroll Type Setting External Device SCROLL TYPE1 / SCROLL TYPE2 (Initial setting) Choose from two scrolling methods. Connecting to an External Amplifier Select the type you prefer. POWER IC ON (Initial setting) / POWER IC OFF SCROLL TYPE1: The characters scroll from right to left, a single When an external amplifier is connected, sound quality can be improved character at a time.
Page 23: Setting Adaptive Steering Remote Control
Setting the External Digital Input D-AUX ON / D-AUX OFF (Initial setting) DE SOURCE FF When an ALPINE Ai-NET compatible digital audio processor (PXA-H701) and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set DIGITAL AUX to ON to enjoy 5.1-channel surround sound.
Page 24: Usb Memory (Optional)
USB memory (Optional) iPhone/iPod (Optional) /ESC SOURCE/ SOURCE/ /ENT Rotary encoder Controlling USB memory (Optional) VIEW Preset buttons (1 through 6) A USB memory may be connected to this unit. With a USB memory An iPhone/iPod can be connected to this unit by using the Interface connected to this unit, the USB memory will be controllable from this cable for iPod (supplied).
Page 25: Searching For A Desired Song
Press to select the desired song. Turn the Rotary encoder to select the desired Song, and then press /ENT. Return to the beginning of the current song: The selected song is played back. Press • After pressing and holding /ENT for at least 2 seconds while in Fast backward through current song: each hierarchy (except SONG and AUDIOBOOK hierarchy), all Press and hold...
Page 26: Direct Search Function
Direct Search Function Random Play Shuffle (M.I.X.) The unit’s direct search function can be used to search for an album, The Shuffle function of the iPhone/iPod is displayed as on this song, etc., more efficiently. In Playlist/Artist/Album/Song/Podcast/ unit. Genre/Composer/Audiobook mode, you can quickly target any song. Shuffle Albums: The songs on each album are played back in proper order.
Page 27: Repeat Play
Only Repeat One is available for the iPhone/iPod. (Optional) Repeat One: A single song is repeatedly played back. Alpine introduces IMPRINT - the world’s first technology that Press thoroughly eliminates in-car acoustic problems that normally degrade The song is played back repeatedly.
Page 28: Adjusting Subwoofer Level/Bass Level/Treble Level/Fader (Between Front And Rear)/ Balance (Between Left And Right)/Black Out In Multeq Mode
Adjusting Subwoofer Level/Bass Level/ Adjusting Sound Setting in Manual Mode Treble Level/Fader (Between Front and You can change these sound settings to create your own preference Rear)/Balance (Between Left and Right)/ when the MultEQ mode is set to MULTEQ OFF (Manual Mode). Black Out in MultEQ mode Use steps 1 to 4 to select one of the Sound menu modes to modify.
Page 29: Setting The Subwoofer Phase
Setting the Subwoofer Phase Setting the MX Level MX (MEDIAXPANDER) makes vocals or instruments sound distinct NORMAL (Initial setting) REVERSE regardless of the music source. The FM radio, CD, USB memory and The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) iPhone/iPod, will be able to reproduce the music clearly even in cars or SUBWOOFER REVERSE (180°).
Page 30: Blackout Mode On And Off
To adjust another band, repeat steps 1 and 2, and Blackout Mode On and Off then adjust all bands. When Blackout mode is turned on, all display indications on this unit Adjusting the Time Correction will turn off to reduce power consumption. This additional power Before performing the following procedures, refer to “About Time enhances the sound quality.
Page 31: Storing The Sound Field Adjustment Settings
Press SOURCE/ to adjust the slope. Storing the Sound Field Adjustment Settings Adjustable slope: FLAT , 6 dB/oct., 12 dB/oct., 18 dB/oct., The SOUND ADJUST Settings containing PARAMETER EQ/ 24 dB/oct. GRAPHIC EQ, T.CORRECTION and CROSSOVER settings can be * FLAT can be set for the HIGH slope only when USER’S is selected in stored in the preset memory.
Page 32: About Time Correction
Time Correction Value List About Time Correction Time Time Delay Distance Distance Delay Distance Distance Difference Difference Number (cm) (inch) Number (cm) (inch) (ms) (ms) The distance between the listener and the speakers in a car vary widely 173.4 68.3 due to the complex speaker placement.
Page 33: About The Crossover
---- 12, 18, ---- range 200 Hz -12 dB For the recommended crossover frequencies of Alpine speakers, refer speaker 24 dB/oct. to the respective Owner’s Manual. FLAT, 6, Front high 20 Hz -...
Page 34: About Imprint
These acoustical problems are so severe that no correction system has been able to overcome them. Until now, with the introduction of IMPRINT, Alpine provides a hardware/software combination that not only solves these problems, it actually improves the sound stage, tonal...
Page 35: Changer (Optional)
Ai-NET compatible. With a CD Changer connected to the Ai-NET input of this unit, the CD Changer will be controllable from Alpine’s Ai-NET system will support up to 6 CD Changers. When this unit. operating two or more changers, the KCA-400C (Multi-Changer Using the KCA-400C (Multi-Changer Switching device) or the Switching device) must be used.
Page 36: Information
CD insertion not possible. unit is at fault. Otherwise, make sure the rest of your system is properly • A CD is already in the CD player. connected or consult your authorized Alpine dealer. - Eject the CD and remove it. Basic •...
Page 37: Indication For Cd Changer
Press the button again for at least 2 seconds. If the disc still does not eject, consult your Alpine dealer. • A disc is left inside the CD Changer. - Press the eject button to activate the eject function. When the...
Page 38: Indication For Usb Memory
Indication for USB memory Indication for iPhone/iPod Mode • The iPhone/iPod is not connected. • Communication error. - Make sure the iPhone/iPod is correctly connected (refer to - Turn the ignition key OFF, and then set to ON again. “Connections”). Make sure the cable is not bent excessively.
Page 39: Specifications
CHASSIS SIZE Specifications Width 178 mm (7") Height 50 mm (2") FM TUNER SECTION Depth 160 mm (6-1/4") Tuning Range 87.5-108.0 MHz NOSEPIECE SIZE Mono Usable Sensitivity 0.7 µV Alternate Channel Selectivity 80 dB Width 170 mm (6-3/4") Signal-to-Noise Ratio 65 dB Height 46 mm (1-13/16")
Page 40: Installation And Connections
Do not tap into these leads to provide power for this unit. When consult a physician immediately. connecting the CDA-105Ri to the fuse box, make sure the fuse for the intended circuit of the CDA-105Ri has the appropriate DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER amperage.
Page 41: Installation
Front Panel This unit When your vehicle has the Bracket, mount the long hex bolt onto the rear panel of the CDA-105Ri and put Caution When you install this unit in your car, do not remove the the Rubber Cap on the hex bolt. If your vehicle does detachable front panel.
Page 42 <JAPANESE CAR> USB memory Connection (sold separately) Connect USB memory 1. Connect the USB cable to the USB connector of the unit, and then secure the connection using the lock case supplied with USB cable as shown below. Front Frame USB memory This unit (sold separately)
Page 43: Connections
Connections (Black) ADAPTIVE STEERING REMOTE G . GND To adaptive steering remote control interface box (Brown/Yellow) ADAPTIVE STEERING REMOTE CONTROL IN1 To adaptive steering remote control interface box (Brown/Orange) ADAPTIVE STEERING REMOTE CONTROL IN2 To adaptive steering remote control interface box (Blue) To Bluetooth INTERFACE (KCE-400BT) (sold separately)
Page 44 • Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

Alpine CDA-105Ri Owner's Manual

Contents

Operating Instructions

Warning

Caution

Precautions

Getting Started

Radio

Rds

CD/Mp3/Wma/Aac

Sound Setting

Other Functions

Setup

USB Memory (Optional)

Iphone/Ipod (Optional)

IMPRINT Operation (Optional)

Changer (Optional)

Information

Installation and Connections

Warning

Caution

Precautions

Quick Links

Related Manuals for Alpine CDA-105Ri

Summary of Contents for Alpine CDA-105Ri

Table of Contents