Setting The Received Calls Automatically (Auto Answer); Displaying The Phone Service Provider Name; Selecting The Output Speaker; Displaying The Firmware Version - Alpine CDA-137BTI Owner's Manual

Setting the Received Calls automatically
(Auto Answer)
 Setting item: Auto Answer
Setting contents:
OFF (Initial setting) / ON
OFF:
When a call is received, it is not answered automatically. Press f
to receive the call.
ON:
When a call is received, it is answered automatically after about 5
seconds.
Note
• If the received call setting on the mobile phone is on, the call will be
answered automatically even though this setting is set to OFF.
Displaying the phone service provider
name
 Setting item: Service Name
Note
• Depending on the character type some phone service provider name
cannot be displayed. "ID UNSENT" will be displayed.

Selecting the output speaker

 Setting item: Speaker Select
Setting contents:
ALL (Initial setting) / F-L / F-R / F-LR
ALL:
The sound be output from all of speakers in car.
F-L:
The sound only be output from the front left speaker.
F-R:
The sound only be output from the front right speaker.
F-LR:
The sound be output from the front left and front right speaker.

Displaying the firmware version

 Setting item: FW Version

Updating the firmware

 Setting item: FW Update
Setting contents:
NO (Initial setting) / YES

Hands-Free Phone Control

About the Hands-Free Phone

Notes
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is made in
a noisy location, difficulty hearing the other person's voice is normal.
• Depending on telephone line conditions or certain mobile devices used,
voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider's network. Additionally, certain features
may not be activated by your service provider, and/or the provider's
network settings may limit the feature's functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well as
the information contained in the Owner's Manual are based upon the
latest available information and are believed to be accurate at the time
of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.

Answering a Call

Press f.
The call starts.
Notes
• When "Auto Answer" is set to ON, you can receive a call automatically.
Refer to "Setting the Received Calls automatically (Auto Answer)" on
page 29.
• While calling, the source sound on the unit is muted. After calling,
playback will resume.

Hanging up the Telephone

Press f.
The call finishes.
Note
• You can also hang up the call by pressing and holding  for at least 2
seconds.

Calling

1
Press f.
The outgoing method list is displayed.
29
-EN