Operating System Independent Speedtouch™ Configuration Setup - THOMSON SpeedTouch 545 Setup And User Manual

1.3.2 Operating System Independent SpeedTouch™
Supported Systems
Prerequisites
SpeedTouch™
Easy Setup
E-DOC-CTC-20030814-0001 v1.0
Configuration Setup
As the SpeedTouch™ is OS-independent, this configuration setup can be used by any
computer system.
Make sure that:
•
The SpeedTouch™ device is correctly set up and turned on as described in
"1.2 Setting Up the SpeedTouch™" on page
•
The SpeedTouch™ device is in its default configuration state.
See "7.4 SpeedTouch™ Default Configuration" on page 88
device.
•
If you want to configure the SpeedTouch™ over the wireless network, the
computer's WLAN client is installed and correctly associated with the Speed-
Touch™ wireless network according to
tion" on page 43.
•
The computer's Operating System supports TCP/IP and it's Ethernet interface is
configured for obtaining its IP configuration dynamically.
In case of problems with DHCP you can also configure the computer's
Note
Ethernet interface with a static Net10 private IP address, e.g. 10.0.0.1,
10.0.0.2, but make sure NOT to use the 10.0.0.138 IP address as this is
the default IP address of the SpeedTouch™.
•
Your web browser is able to run Java scripts.
SpeedTouch™ Easy Setup consists of two parts:
•
Configuration of the SpeedTouch™
•
Additional configuration
9.
"4.1 First-time Wireless Client Associa-
(if needed)
1 SpeedTouch™ Installation
for resetting your
19