THOMSON SpeedTouch 545 Setup And User Manual page 24

1 SpeedTouch™ Installation
Additional configuration
22
Some additional configuration may be needed:
•
Wireless Settings
When running the SpeedTouch™ Setup wizard, the SpeedTouch™ wireless
Access Point settings will be set to their default values. You might need to re-asso-
ciate your WLAN clients, using the factory defaults WLAN settings as specified in
"4.1 First-time Wireless Client Association" on page
For additional security of your wireless network it is recommend to "personalize"
your SpeedTouch™ wireless Access Point settings. See
on page 41 for more information.
•
Computer IP configuration
Most Service profiles will enable the SpeedTouch™ DHCP server. Therefore,
make sure that the computer's Ethernet interface is configured for obtaining its IP
configuration dynamically (DHCP client).
For fixed IP configurations, or other advanced settings, please follow the
Note
instructions provided by your Service Provider or network administrator.
43.
"4 Wireless Connectivity"
E-DOC-CTC-20030814-0001 v1.0