Speedtouch™ Default Configuration - THOMSON SpeedTouch 545 Setup And User Manual

7 Support
7.4 SpeedTouch™ Default Configuration
Reset to default
configuration
WLAN clients
88
Proceed as follows:
Make sure the SpeedTouch™ is powered on.
1
Use a pencil to press the Default button at the SpeedTouch™ until all the LEDs on
2
the front panel start flashing.
Release the button.
3
The SpeedTouch™ reboots and will come online again with factory settings.
You will need to re-associate and register your WLAN clients, using the factory defaults
WLAN settings. See "4.1 First-time Wireless Client Association" on page
Default button
43.
E-DOC-CTC-20030814-0001 v1.0