THOMSON SpeedTouch 545 Setup And User Manual page 22

1 SpeedTouch™ Installation
Configuration of the
SpeedTouch™
20
Proceed as follows:
Open a web browser and browse to the SpeedTouch™ web pages at
1
http://10.0.0.138. See
information.
If you can not access the SpeedTouch™ web pages, it is probably not in
Note
its default state. It is recommended to reset the device.
The embedded Easy Setup
2
Click Next.
If Easy Setup
Note
Advanced > Easy Setup.
The following window invites you to select the appropriate Service for your inter-
3
net connectivity:
In the Service list, select the Service as specified by your Service Provider and click
Next to continue.
If only one Service is available, this window will not be shown.
Note
Subsequent screens will guide you through the configuration setup of the Speed-
4
Touch™. Follow the instructions and enter the required information whenever
needed. The requested information will depend on the selected Service profile
and should be provided by your Service Provider.
Click Next whenever requested.
"5 SpeedTouch™ Web Interface" on page 47
wizard will appear automatically:
doesn't start automatically go to
for more
E-DOC-CTC-20030814-0001 v1.0