Axis 200+ User Manual page 39

Root password The password of the Administrator. When configuring the
unit for the first time, you log on as user
default password
the root password later, since all Axis products are shipped
with this password as default.
Usernames and By default, the AXIS 200+ supports anonymous user
access, which means that anybody on the Internet/intranet
passwords
may access the AXIS 200+ snapshots from a Web
browser. Should you wish to restrict access to specific
users, enter the usernames and passwords of only those
authorized users. If anonymous user service is satisfactory
to your system, simply do not add any users. Note: Only
characters a-z, A-Z or 0-9 are valid.
IP Address Defines the Internet address of the AXIS 200+.
Default Router Defines the default router for the AXIS 200+. By default the
parameter is set to automatic router search.
Net Mask Defines the subnet mask for the AXIS 200+. Used for
determining when the traffic should be sent via a router. The
default 0.0.0.0 indicates automatic router sensing.
Primary DNS The Internet address of the primary DNS server. Used for
identifying computers with names instead of IP addresses.
Secondary DNS The Internet address of the secondary DNS server. The
secondary DNS server will be used in case the primary
DNS server is unavailable or disconnected.
SMTP Mail Server Name of the server that provides your e-mail facilities.
SMTP Return Path The reply address for e-mails sent by the AXIS 200+.
Enable BOOTP Enables the BOOTP protocol for downloading the Internet
address.
Enable RARP Enables the RARP protocol for downloading the Internet
address.
root
pass . You are recommended to change
and use the