Axis 291 1U Installation Manual
1u video server rack
Hide thumbs
Also See for 291 1U:
- Installation manual (91 pages) ,
- Specifications (6 pages) ,
- Installation manual (10 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Axis 291 1U
Summary of Contents for Axis 291 1U
- Page 1 AXIS 291 1U Video Server Rack Installation Guide...
-
Page 2: About This Document
About This Document This document describes how to install Axis blade video servers in the AXIS 291 1U Video Server Rack. Updated versions of this document will be available on the Axis Web site. Intellectual Property Rights - intellectual property rights relating to technology embodied in the product described in this document. - Page 3 This installation guide describes the hardware installation of the AXIS 291 1U Video Server Rack, which can accomodate up to 3 Axis blade video servers. To install the Axis video server on the network, please see the video server’s own installation guide.
-
Page 4: Axis 291 1U Video Server Rack - Overview
AXIS 291 1U Video Server Rack AXIS 291 1U Video Server Rack - Overview Read the following information to familiarize yourself with the AXIS 291 1U Video Server Rack, making note of where the connectors and indicators are located. I/O Terminal... - Page 5 The AXIS 291 must be grounded to the same ground as the equipment rack. When mounting the AXIS 291 in a rack, never stack other units directly on top - the mounting brackets are not designed to support more than 1 unit. Each unit in the rack must be secured with appropriate brackets. Place the heaviest units at the bottom of the rack.
-
Page 6: Connect Power
Please ensure that the correct AC power cord for your country is used. The AXIS 291 has no On/Off switch or button, and will power up as soon as the AC power cord is connected. It is important to locate the unit so that the AC power cord is easily accessible. Detaching the cord is the only way to remove power to the unit. - Page 7 Mounting AXIS blade video servers The AXIS 291 can accomodate 3 Axis blade video servers. The slots for these are numbered 1-3 from left to right, as seen from the front. The I/O connectors for each slot on the rear panel are also numbered.
-
Page 8: The I/O Terminal Connector
AXIS 291 1U Video Server Rack The I/O Terminal connector The AXIS 291 server provides an I/O terminal connector for each Axis blade video server (see illustration on page 4). This is used for connecting external equipment, in applications for e.g. motion detection, event triggering, time lapse recording, alarm notification via email, image storage to FTP locations, etc.