Quick Installation Guide This guide covers the installation and basic setup procedures for your AXIS 200+. Should you require more detailed instructions, please refer to the AXIS 200+ User’s Manual available via the Axis WWW Home Page at http://www.axis.com/salessupport/manuals.html, or http://www.se.axis.com/products/documentation/manuals.html Control Snapshot button...
UNIX Type the following commands: arp -s <Internet address> <Ethernet address> temp ping <Internet address> Example: arp -s 192.168.3.191 00:40:8c:10:00:86 temp ping 192.168.3.191 6. Access the AXIS 200+ by entering its Internet address (URL) into the location field of your Web browser. Example: http://192.168.3.191/ 7.
Page 4
To integrate live snapshot images into your own applications and web pages, refer to the target snapshot type as detailed below: Example: http://192.168.3.191/fullsize.jpg Example: ( Adding an HTML reference) <IMG SRC=”http://192.168.3.191/fullsize.jpg” ALT=”A fullsize JPEG Image from AXIS 200+”> The CRON Script The AXIS 200+ includes a CRON script service that facilitates periodic command execution.
Page 5
Point to Point Protocol (PPP) PPP support allows you to use your AXIS 200+ remotely, just as if it were on your local network. Any PPP capable host can be used to dial into the AXIS 200+. PPP configuration for a Windows 95 host Please refer to the AXIS 200+ web pages should you wish to use PPP from another host, i.e.
Need help?
Do you have a question about the 200+ and is the answer not in the manual?
Questions and answers