Advertisement
Position
You can select an entry in the dropdown list. The AXIS 240
allows you to define 10 different camera positions. These
positions can be used from the Pan/Tilt Control page for
directing a camera to a predefined position.
New Name
Name for the selected position
Source
The camera input source. Note that the camera must be
connected to a Pan/Tilt device.
Pan,
The desired pan and tilt value in degrees relative to the home
Tilt
position. The valid range depends on the connected Pan/Tilt
device.
Zoom
The desired zoom value in the range 1-999, where 1
corresponds to wide and 999 corresponds to tele.
Source
The camera input source.
Top,
Specify end positions for all the movement directions. These
Bottom,
restrictions will assure that the swing of the camera will be
Left,
kept within certain bounds. The values are specified in
Right
degrees and the valid range depends on the connected
Pan/Tilt device.Click Get Current to retrieve the value of the
current camera position. The values are specified in degrees
and the valid range depends on the connected Pan/Tilt
device.
Max Zoom,
Restrictions for the camera zoom. The valid range is 1-999,
Min Zoom
where 1 corresponds to wide and 999 corresponds to tele.
Advertisement
