Advertisement
[Mode]
Serial Mode
When set to Disabled, PPP or zmodem access is not allowed.
When set to Full Support, serial mode is enabled for both
incoming and outgoing modem connection. When set to
Inbound only, the AXIS 240 answers incoming calls, but does
not dial up. When set to Outbound only, the AXIS 240 dials up
according to the behavior programmed in a CRON script, but
does not answer incoming calls.
[Settings]
Modem Type
Specifies the modem type: Autodetected Modem or Null
Modem.
Detected Modem
Set internally by the AXIS 240.
Baud Rate
19200 or 38400 is recommended. When used with
GSM/cellular phones, always set the Baud rate to 9600.
Flow Control
Specifies the modem server operation mode. Set to
Hardware (RTS/CTS)
Modem Init String
String of setup commands to be sent to the modem. Used for
non-US Robotics modems.
Busy Redial
The number of additional attempts the AXIS 240 will make in
Attempts
order to establish a connection in case the line is busy.
Link Quality
Determines the link quality in PPP. Enabled is default.Only
disable when connecting your camera server to a Macintosh.
http://<camserv>/hardreset
camserv
Advertisement
