Advertisement
SafeMode
To avoid any undesired camera movements, you can
enable the SafeMode function. However, the traffic will
increase and normally you can keep SafeMode dis-
abled.
Movement
These soft stops indicate the end position in all direc-
SoftStops
tions; i.e. left, right, up and down. The soft stops will
assure that the camera is kept within certain bounds.
Focus & Zoom
These soft stops indicate the end position for focus and
SoftStops
zoom. In order not to stall the motors when approach-
ing max zoom or max tele, it is important that you limit
the zoom/tele interval in accordance with the capabili-
ties of your specific lenses. Note: If you are not using a
zoom lens, set the ZoomWide parameter to 1.
Optical Data
The MaxDeg setting should correspond to the angle at
max zoom. The MinDeg setting should correspond to
the angle at max tele.
Show Zoom &
If enabled, the zoom and focus bars will be displayed
Focus bars
on the Pan/Tilt Control page.
Advertisement
