Headset Memory Mode; Ring Type; Directory Search - Polycom SoundPoint IP 320 User Manual

Headset Memory Mode

This feature is useful for permanent or full‐time headset users.
1. Press the Menu button.
2. Select Settings > Basic > Preferences > Headset Memory.
3. Use the up or down arrows to select Enabled.
4. Press to confirm your choice.
5. Press the Menu button or the left arrow key until you return to the
idle display.

Ring Type

You can select from different ring types to distinguish between lines or to
have a different ring from a co‐worker close by.
1. Press the Menu button.
2. Select Settings > Basic > Ring Type.
3. Select the line you want to change using the up or down arrow keys if
multiple lines are configured on your phone.
4. Use the up or down arrow keys to select the ring type you want.
5. Press the Play soft key to hear the ring type, if applicable.
6. Press the Select soft key.
7. Press the Menu button or the left arrow key until you return to the
idle display.

Directory Search

You can configure how the search of the Contact Directory is performed. You
can search by first name or last name.
1. Press the Menu button.
2. Select Settings > Basic > Preferences > Directory Search.
3. Use the up or down arrows to select the directory search parameter.
Last name is the default parameter.
4. Scroll through the list and press
Press the Yes or Cancel soft key to accept or cancel changes. Your
5.
phone will restart to set the new directory search mode if you
selected Yes to accept the changes.
a few minutes depending on the size of your contact directory.
to confirm your choice.
NOTE: The reconfiguration could take
9