End A Conference Call; Call Transfer; Announced Transfer; Blind Transfer - Polycom SoundPoint IP 320 User Manual

Call Transfer

If you have more than one call on hold, use the up and down arrow
to switch to one of the calls on hold, then press the Join soft key. A
conference is created with the active call on hold and yourself.

End a Conference Call

Press the EndCall soft key or hang up. The other parties will stay connected
to each other.

Announced Transfer

You can talk privately to the party to which you are transferring the call
before the transfer is complete. You can cancel the transfer before the call
connects by pressing the Cancel soft key.
1. During a call, press the Trans soft key. The active call is placed on
hold.
2. Dial the extension or number to which you want to transfer the call
followed by #.
3. After the party answers and you announce, press the Trans soft key
to complete the transfer.

Blind Transfer

The call is automatically transferred after you dial the number of the party to
whom you want to transfer the call.
1. During a call, press the Trans soft key.
2. Press the Blind soft key.
3. Perform one of the following steps:
Dial the extension or number to which you want to transfer the
call.
‐OR‐
Press the Dir soft key to access the Contact Directory, use the up
or down arrow key to access a contact, then press the Dial button.
‐OR‐
Press the Callers soft key to access the Received Calls list, use the
up or down arrow to access a contact, then press the Dial button.
‐OR‐
19