Place A Call To A Contact; Place A Call; Handset; Hands-Free/Speakerphone - Polycom SoundPoint IP 320 User Manual

Place a Call

4. Press the Delete soft key. The entry is deleted and the next entry in
the directory appears.
5. Repeat steps 2 – 4 to delete additional entries, if applicable.
6. Press the left arrow key until you return to the idle display.

Place a Call to a Contact

1. Press the Dir soft key.
2. Use the up or down arrow to scroll through the list to find the contact
you want to delete.
NOTE: You can also use the * (star) to page up and the # (pound) key to page
down.
3. Press the Dial button or lift the handset.
You can place a call using the handset, headset, speakerphone, the Dial
button, or the Line 1/Line 2 keys. You can also dial the number first, and then
choose the method you want to use to speak to the called party.
During a call, you can alternate between the handset, headset, or hands‐free
speakerphone by pressing the or keys.
Call Duration on an active call is monitored through a local call timer. This is
visible within the active call window on the display.

Handset

Perform one of the following steps:
Pick up the handset.
Dial the number followed by #.
‐OR‐
Dial the number followed by #.
Pick up the handset.

Hands-free/Speakerphone

Perform one of the following steps:
Leaving the handset on‐hook, press Dial, Line 1, Line 2, , or the
NewCall soft key to obtain a dial tone.
‐OR‐
13