5.3 Preparing the Computer for Disassembly
Perform the following steps before disassembling the computer. Consult
the computer reference guide, available as an electronic book on the
QuickRestore CD-ROM, for instructions on the steps below.
1. Undock the computer from the docking base.
2. Disconnect the AC Adapter and external devices.
3. Remove any battery packs inserted into the battery bay, DualBay
(Armada E500 only), or MultiBay.
4. If installed, remove the diskette drive from the DualBay
(Armada E500 only).
5. Remove the hard drive from the hard drive bay.
6. Remove any devices installed in the MultiBay.
Removal and Replacement Procedures
5-3