System Board
Armada V300 only
Intel Celeron 500-MHz processor with
64 MB SDRAM
(use only with config. codes beginning with
"DVR")
Intel Celeron 466-MHz processor with
64 MB SDRAM
(use only with config. codes beginning with
"DVP")
Intel Celeron 466-MHz processor with
64 MB SDRAM
(use only with config. codes beginning with
"CXX" and "DVQ" and config. codes
"DJD3" and "DJD4")
Intel Celeron 400-MHz processor with
64 MB SDRAM
(use only with config. codes beginning with
"CXW" and config. codes "DJD1" and
"DJD2")
Intel Celeron 400-MHz processor with
32 MB SDRAM
(use only with config. codes beginning with
"CXV")
Removing the System Board
1. Prepare the computer for disassembly (Section 5.3) and, in the order
below, remove the following components:
modem or modem/Network Interface Card (Section 5.5)
touch button (Section 5.6)
keyboard (Section 5.7)
display assembly (Section 5.9)
LED board (Section 5.11)
top cover (Section 5.12)
front shield (Section 5.13)
diskette drive (Section 5.14, Armada V300 only).
continued
Removal and Replacement Procedures
177748-001
177747-001
160535-001
160534-001
159540-001
5-31