5.14 Diskette Drive (Armada V300 only)
Diskette drive
Removing the Diskette Drive
1. Prepare the computer for disassembly (Section 5.3) and, in the order
below, remove the following components:
touch button (Section 5.6)
keyboard (Section 5.7)
display assembly (Section 5.9)
LED board (Section 5.11)
top cover (Section 5.12).
2. Release the ZIF connector that connects the diskette drive
5-23).
3. Disconnect the diskette drive cable
4. Remove the screw that secures the diskette drive to the base
enclosure
5. Lift up on the back of the diskette drive
Figure 5-23. Removing the Diskette Drive
Reverse the removal procedure described above to replace the
diskette drive.
Diskette Drive
Spare Part Number Information
.
.
and remove it.
Removal and Replacement Procedures
160537-001
(Figure
5-29