Connecting To A Pc - Teac LCDV2657DVR User Manual

System Connections

Connecting to a PC

Follow the steps and figure below to connect PC to the unit.
1. Connect one end of the VGA cable to the VGA input jack on the jack panel of the unit and the other
end to the PC VGA output.
2. Connect one end of the audio cables to the PC audio input jack on the jack panel of the television
and the other end to the PC audio output jack.
3. Set the PC video resolution to match that of the television
After connection, turn on the power of the unit and the external AV signal source. Press INPUT then
direction buttons to select VGA mode, and then press the ENTER button to confirm.
(Native 1366 x 768@60Hz).
17