Teac LCDV2657DVR User Manual page 35

TV Operation and System Setup
During disk formatting, please do not unplug the USB device and wait for several minutes.
NOTES:
We cannot guarantee compatibility (operation and/or bus power) with all USB mass storage
devices and assumes no responsibility for any loss of data that may occur when connected to this
unit.
With large amounts of data, it may take longer for the system to read the contents of a USB device.
Unit may require longer time to format depending on the volume of the USB device.
Some USB devices may not be properly recognized.
Even when they are in a supported format, some files may not play or display depending on the
content.
Please make sure the USB device's file system is FAT32.
WARNING
All data on the connected device will be lost if you confirm to format.
It is strongly recommended that the USB device is dedicated only for this unit. Various external
data contain in the USB device might cause DVR file system corrupt and requires formatting.
Once USB device is formatted, unit will create a unique file system on it. Therefore, it is not
advisable to connect USB device to a computer to export data.
Time Shift Size
After the disk format is finished, the menu as
shown on the right will appear.
The item Time Shift Size is
◄► button to
time shift. The maximum value is 8G.
Press the ▼ button to highlight OK and press the
ENTER button to confirm and return.
Speed
Once USB device is checked, this item will display the USB data transfer rate.
Max record time
Press the ▲▼ button to select Max record time and press the ◄► button select desired time as the
max record time.
Note: While doing instant recording, record will be stopped once it reaches the max record
time.
Allow Update
Press the ▲▼ button to select Allow Update and press the ◄► button to select On or Off.
highlighted,
choose a size to be allocate for
press the
32