Teac LCDV2657DVR User Manual page 34

TV Operation and System Setup
OSD Time Out
This item is used to set the duration of the OSD on the screen.
Press the ▲▼ button to select OSD Time Out and press the ◄► button to select desired time.
DVR File System
Press the ▲▼ button to select DVR File System and
press the ► or ENTER button to enter the sub-menu, as
shown:
Press the MENU button to return to the previous menu.
Press the EXIT button to exit.
Select Disk
Select a disk to store the recorded file.
Press the ▲▼ button to select Select Disk and press
the ► or ENTER button to prompt a sub-menu, as
shown:
The item Disk is highlighted and press the ◄►
button select desired disk. The available item
varies depending on the external USB device
connected to the unit.
Press the ▼ button to highlight OK and press the ENTER button to confirm.
Check DVR File System
Press the ▲▼ button to select Check DVR File System and press the ► or ENTER button to start to
check the DVR File system.
After checking DVR file system, the item "USB Disk" will display "Pass" indicating the file system in the
USB disk connected has been
System, then unit will prompt a message asking user to format it.
Format
Press the ▲▼ button to select Format and press the
► or ENTER button to prompt a sub-menu which
occurs only when the USB device
first time, as shown:
The item DVR File System Size is highlighted
and press the ◄► button
to be format. The available
depending on the external USB device connected
to the unit.
Press the ▼ button to highlight OK and press the ENTER button to format the disk you selected.
checked and ready to use. If the USB disk does not have a DVR File
is plug in for the
to choose the capacity
capacity varies
31