Table of Contents
Advertisement
System Connections (Continued)
Connecting PC
Follow the steps and figure below to connect PC to the unit.
1.
Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and the
other end to the PC.
2.
Connect one end of the audio cables to the PC audio input jack on the rear panel of the unit
and the other end to the PC audio output jack.
3.
Set the PC's resolution at 1024×768@60Hz.
After connection, turn on the unit and the PC and then press the SOURCE button to shift to VGA
mode.
- 15 -
Hide quick links:
Advertisement
Table of Contents
