Connecting The Power Cord; Basic Operation; Before Use; Turning The Power Off - Denon PMA-1510AE Owner's Manual

Connecting the power cord

Wait until all connections have been completed before connecting the
power cord.
Power cord
(supplied)
NOTE
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not use any cord other than the provided power cord.

Basic operation

Symbols used to indicate buttons in this manual
To household
Button located on both the main unit and
power outlet
(AC 230 V, 50 Hz) the remote control
Button only on the main unit
Button only on the remote control
<POWER> <SOURCE DIRECT>
<BASS> <BALANCE>
<TREBLE>
VOLUME

Before use

1
Turn the
BUTTON
<BUTTON>
2
[BUTTON] <SOURCE DIRECT>
Set
VOLUME
3
<BASS>
Set
center positions.
4
Press
• The power indicator blinks red for several seconds, then
lights green.
• When set to "jOFF", the power turns off.

Turning the power off

1
Press
The power is set to the standby mode.
2
Press
The power indicator turns off, and so does the power.
[AMPLIFIER POWER]
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when going on vacation, either press
power, or unplug the power cord from the power outlet.
VOLUME
all the way down.
to "OFF".
<TREBLE> <BALANCE>
, and to the
<POWER>
.
[AMPLIFIER POWER]
.
<POWER>
.
<POWER>
to turn off the
ENGLISH
7