Denon PMA-600NE Owner's Manual
Integrated amplifier
Hide thumbs
Also See for PMA-600NE:
- Owner's manual (52 pages) ,
- Quick start manual (21 pages) ,
- Quick start manual (12 pages)
Related Manuals for Denon PMA-600NE
Summary of Contents for Denon PMA-600NE
- Page 1 Contents Connections Playback Settings Tips Appendix PMA-600NE INTEGRATED AMPLIFIER Owner’s Manual Remote control Front panel Rear panel Index unit...
- Page 2 Contents Connections Playback Settings Tips Appendix Playback Accessories Inserting the batteries Turning the power on Operating range of the remote control unit Switching the power to standby Features Selecting the input source High quality sound Adjusting the volume High performance Turning off the sound temporarily (Muting) Part names and functions Adjusting the tone...
- Page 3 Contents Connections Playback Settings Tips Appendix Tips Tips Troubleshooting Power does not turn on / Power is turned off Operations cannot be performed through the remote control unit No sound comes out Desired sound does not come out Sound is interrupted or noise occurs Bluetooth cannot be played back Audio from digital devices cannot be played back (Coaxial/ Optical)
- Page 4 Settings Tips Appendix Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
- Page 5 Contents Connections Playback Settings Tips Appendix Inserting the batteries NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. Remove the rear lid in the direction of the arrow and 0 Do not use two different types of batteries.
- Page 6 Contents Connections Playback Settings Tips Appendix Features High quality sound High performance Equipped with an advanced high current single push-pull circuit DIGITAL AUDIO IN connectors (COAXIAL/OPTICAL) that achieves a perfect balance of delicacy with power You can play back PCM signals up to 192 kHz/24 bits by inputting digital This unit is equipped with a HC transistor that allows a peak current that audio signals from an external device into this unit.
- Page 7 Contents Connections Playback Settings Tips Appendix Part names and functions Front panel For details, see the next page. Remote control Front panel Rear panel Index unit...
- Page 8 Contents Connections Playback Settings Tips Appendix D ANALOG MODE button This turns the analog mode on/off. (v p. 27) E ANALOG MODE indicator This is displayed as follows, according to the analog mode status. Lit in green: Analog mode on Off: Analog mode off F SOURCE DIRECT indicator This is displayed as follows according to the source direct status.
- Page 9 Contents Connections Playback Settings Tips Appendix N DIGITAL IN/BLUETOOTH indicator This is displayed as follows, according to the status of the digital audio signals that are input to the digital audio input terminals on this unit. Lit in green: Playback is supported on this unit Blinking in green: Playback is not supported on this unit Off: Sampling frequency cannot be detected Q1 Q2...
- Page 10 Contents Connections Playback Settings Tips Appendix Rear panel For details, see the next page. Remote control Front panel Rear panel Index unit...
- Page 11 Used to connect devices equipped with digital audio output connectors. (v p. 21) C IR CONTROL connectors Used to connect Denon network audio players with an IR controller. D Speaker terminals (SPEAKERS) Used to connect speakers. (v p. 17) E Power cord (v p. 22)
- Page 12 Appendix Remote control unit The remote control provided with this unit can control a network audio player in addition to a Denon CD player. “CD player operations” (v p. 13) “Network audio player operations” (v p. 14) o Operating this unit A Remote control signal transmitter This transmits signals from the remote control unit.
- Page 13 Tips Appendix o CD player operations A Denon CD player can be operated. To operate a CD player, press the REMOTE MODE CD button to switch the remote control to the CD player operation mode. A Power operation button (POWER X)
- Page 14 Settings Tips Appendix o Network audio player operations You can operate a Denon network audio player. To operate a network audio player, press the REMOTE MODE NET button to switch the remote control to the network audio player operation mode.
- Page 15 Contents Connections Playback Settings Tips Appendix K FAVORITES button L OPTION button M ENTER button N Cursor buttons (uio p) O SETUP button P CLEAR button Q DIMMER button 0 The remote control may not operate some products. Remote control Front panel Rear panel Index...
- Page 16 Contents Connections Playback Settings Tips Appendix o Contents o Cables used for connections Provide necessary cables according to the devices you want to Connecting speakers connect. Connecting a playback device Connecting a recording device Speaker cable Connecting to a device with digital audio output connectors Connecting the power cord Subwoofer cable NOTE...
- Page 17 Contents Connections Playback Settings Tips Appendix Connecting speakers NOTE Turn the speaker terminal counterclockwise to loosen it. 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable core wires do not protrude from the speaker terminal.
- Page 18 Contents Connections Playback Settings Tips Appendix Subwoofer connection Speaker connection Use a subwoofer cable to connect the subwoofer. Subwoofer Remote control Front panel Rear panel Index unit...
- Page 19 Contents Connections Playback Settings Tips Appendix Connecting a playback device You can connect turntables, CD players, network audio players and Blu-ray Disc players to this unit. If you set this unit’s input source to “PHONO” and you accidentally increase the volume without having a turntable connected, you may hear a hum noise from the speakers.
- Page 20 Contents Connections Playback Settings Tips Appendix Connecting a recording device Recording device AUDIO OUT AUDIO IN NOTE 0 Never insert the short-circuiting pin plug into the RECORDER output connectors. Doing so could result in damage. Remote control Front panel Rear panel Index unit...
- Page 21 Contents Connections Playback Settings Tips Appendix Connecting to a device with digital audio output connectors Input digital audio signals to this unit and convert the signals for playback using the D/A converter of this unit. (v p. 30) CD player / Satellite receiver etc.
- Page 22 Contents Connections Playback Settings Tips Appendix Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord Remote control Front panel Rear panel Index unit...
- Page 23 Contents Connections Playback Settings Tips Appendix o Contents Turning the power on Switching the power to standby Selecting the input source Adjusting the volume Turning off the sound temporarily (Muting) Adjusting the tone Playing CDs Listening to music on a Bluetooth device Connecting and playing back from a digital device (Coaxial/ Optical) Recording...
- Page 24 Contents Connections Playback Settings Tips Appendix Turning the power on AMP POWER X Press X on the main unit to turn the power on. Input source select buttons The power indicator lights green. 0 Press AMP POWER X on the remote control unit to turn on power from standby mode.
- Page 25 Contents Connections Playback Settings Tips Appendix Selecting the input source Turning off the sound temporarily (Muting) Press the input source select button to be played back. The indicator of the selected input source lights. Press MUTE :. The power indicator flashes green. 0 You can also select the input source by turning INPUT SELECTOR on the main unit.
- Page 26 Contents Connections Playback Settings Tips Appendix o Playback in source direct mode Playing CDs The signal does not pass through the tone adjustment circuitry (BASS, This section uses playback from a CD as an example. TREBLE and BALANCE), resulting in playback of a higher sound quality.
- Page 27 Contents Connections Playback Settings Tips Appendix o Playback in ANALOG MODE If analog mode is turned on when playing an analog input source 0 A digital input source (“COAXIAL”, “OPTICAL 1”, “OPTICAL 2”) or “BLUETOOTH” source cannot be selected when analog mode is on. (PHONO, CD, NETWORK, AUX, RECORDER), power to the digital input circuit and Bluetooth module is turned off.
- Page 28 Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth Press the input source select button (Bluetooth) to device switch the input source to “BLUETOOTH”. When using for the first time, the unit will go into the pairing mode Music files stored on Bluetooth devices such as smartphones, digital automatically and the DIGITAL IN/BLUETOOTH indicator will blink music players, etc.
- Page 29 Contents Connections Playback Settings Tips Appendix o Pairing with other Bluetooth devices Play music using any app on your Bluetooth device. Pair a Bluetooth device with this unit. The next time the input source is switched to “BLUETOOTH”, this unit automatically connects to the last Bluetooth device that was Activate the Bluetooth settings on your Bluetooth connected.
- Page 30 Contents Connections Playback Settings Tips Appendix o Reconnecting to this unit from a Bluetooth Connecting and playing back from a device digital device (Coaxial/Optical) After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. Connect digital device to this unit.
- Page 31 Contents Connections Playback Settings Tips Appendix o Audio signals that can be played back Recording See “D/A converter” (v p. 43). Audio signals input into this unit can be output to an external recording device. When recording audio from a playback device connected to this NOTE unit, audio can be recorded with the playback device still connected to this unit.
- Page 32 Contents Connections Playback Settings Tips Appendix Setting the Auto Standby mode You can set the unit to automatically switch to standby mode if the unit is Press and hold AMP POWER X for 5 seconds or more not operated for 30 minutes when there is no audio input (Auto Standby to switch it on and off.
- Page 33 Contents Connections Playback Settings Tips Appendix o Contents Tips Troubleshooting I want to turn on power to this unit from a Bluetooth device Power does not turn on / Power is turned off I want to adjust the tone myself Operations cannot be performed through the remote control unit I want sound playback that is faithful to the original sound No sound comes out...
- Page 34 Contents Connections Playback Settings Tips Appendix Tips I want to turn on power to this unit from a Bluetooth device When this unit is on Bluetooth standby (the power indicator is lit in red), the power of this unit can be turned on by selecting this unit from the device list on a Bluetooth device paired with this unit.
- Page 35 Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section.
- Page 36 Contents Connections Playback Settings Tips Appendix Power does not turn on / Power is turned off Power is not turned on. Check whether the power plug is correctly inserted into the power outlet. (v p. 22) Power automatically turns off. The Auto Standby mode setting is on.
- Page 37 Contents Connections Playback Settings Tips Appendix Operations cannot be performed through the remote control unit Operations cannot be performed through the remote control unit. Batteries are worn out. Replace with new batteries. (v p. 5) Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 5) Remove any obstacle between this unit and the remote control unit.
- Page 38 Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. Check the connections for all devices. (v p. 16) Insert connection cables all the way in. Check that input connectors and output connectors are not reversely connected. Check cables for damage.
- Page 39 Contents Connections Playback Settings Tips Appendix Desired sound does not come out No sound comes out of a specific speaker. Check that speaker cables are properly connected. (v p. 17) Adjust the BALANCE control knob. (v p. 25) The left and right of stereo sound is reversed. Check whether the left and right speakers are connected to the correct speaker terminals.
- Page 40 Contents Connections Playback Settings Tips Appendix Sound is interrupted or noise occurs When playing a record, the sound is distorted. Adjust to a proper needle pressure. Check the tip of the needle. Replace the cartridge. When playing a record, a humming noise comes out of the speakers. Check that the turntable is connected correctly.
- Page 41 Contents Connections Playback Settings Tips Appendix Bluetooth cannot be played back Bluetooth devices cannot be connected to this unit. The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the Bluetooth device to enable the Bluetooth function. Bring the Bluetooth device near to this unit.
- Page 42 Contents Connections Playback Settings Tips Appendix Audio from digital devices cannot be played back (Coaxial/Optical) The DIGITAL IN/BLUETOOTH indicator is off. When digital audio signals cannot be detected properly, the DIGITAL IN/BLUETOOTH indicator is off. (v p. 30) The DIGITAL IN/BLUETOOTH indicator is blinking in green. The DIGITAL IN/BLUETOOTH indicator blinks in green when audio signals that are not supported by this unit are input.
- Page 43 Contents Connections Playback Settings Tips Appendix D/A converter Playing back a Bluetooth device This unit supports the following Bluetooth profile. o Specifications of supported audio signals A2DP (Advanced Audio Distribution Profile): When a Bluetooth device that supports this standard is connected, Coaxial/Optical monaural and stereo sound data can be streamed at a high quality.
- Page 44 Contents Connections Playback Settings Tips Appendix Explanation of terms Speaker impedance This is an AC resistance value, indicated in Ω (ohms). Greater power can be obtained when this value is smaller. Sampling frequency Sampling involves taking a reading of a sound wave (analog signal) at Source direct regular intervals and expressing the height of the wave at each reading in Playback with higher fidelity to the source becomes possible, as input...
- Page 45 Contents Connections Playback Settings Tips Appendix Trademark information The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners.
- Page 46 Contents Connections Playback Settings Tips Appendix Specifications o Power amplifier section Rated Output Power: 2-channel driving (CD → SP OUT) 45 W + 45 W (8 Ω/ohms, 20 Hz - 20 kHz, T.H.D. 0.07 %) 70 W + 70 W (4 Ω/ohms, 1 kHz, T.H.D. 0.7%) Total harmonic distortion: 0.01 % (Rated output: –3 dB), 8 Ω/ohms, 1 kHz Output terminals:...
- Page 47 Contents Connections Playback Settings Tips Appendix o Overall performance SN Ratio (A network): PHONO (MM): 84 dB (With input terminals short-circuited, 5 mV input signal) CD, NETWORK, AUX, RECORDER: 105 dB (input terminals short-circuited) Frequency response: 5 Hz – 100 kHz (0 – -3 dB) Tone control: BASS: 100 Hz ±8 dB TREBLE: 10 kHz ±8 dB...
- Page 48 Contents Connections Playback Settings Tips Appendix o Bluetooth section Communications system: Bluetooth Version 4.2 Transmission power: Bluetooth Specification Power Class 1 Maximum communication range: Approx. 98.4 ft/30 m in line of sight Used frequency range: 2.4 GHz Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.3 AVRCP （Audio Video Remote Control Profile）...
- Page 49 Contents Connections Playback Settings Tips Appendix o Dimensions (Unit : in. (mm)) 17 1/8 (434) 2 3/8 (60) 1 7/8 (45) 13 5/8 (344) 1 7/8 (45) o Weight : 16 lb 5 oz (7.4 kg) Remote control Front panel Rear panel Index unit...
- Page 50 Contents Connections Playback Settings Tips Appendix Index Input source ........... 25 Satellite receiver ..........21 Source direct ..........26, 44 Speaker impedance ........44 Auto Standby mode ........32 Muting ............25 Speakers ............17 BALANCE ............25 Network audio player ........19 Tips ..............
- Page 51 3520 10698 10AD Copyright © 2019 D&M Holdings Inc. All Rights Reserved.