Tool Storage; Cord Release; Features; Tool Caddy - Royal Appliance COMMERCIAL Owner's Manual

INSTALL TURBO TOOLB SECURE BACK HOSE SECURE SIDE HOSE
Clip Turbo Toolm onto the Wrap hose around back of Align tabs on clear dirt passage window
front of the turbo tool caddy. hose caddy (Diagram 1). Push
with the slots on the lower hose cuff. Push
hose wand down into the right
and turn hose clockwise until secure.
side of cleaner (Diagram la).
.
TOOL STORAGE INSTALL DIRT CONTAINER
Attach tools: (a) Slide the Align slots on lid with tabs on container Set aligning tab on bottom of
dust brush onto post on the (Diagram 4). Push the lid down and dirt container into rectangular
upper tool caddy with bristles twist clockwise. NOTE: There is a slot on cleaner (Diagram 5),
facing out. (b) Slide the
guide arrow on back of lid. Align and push to snap into place
extension wandlcrevice tool arrow with right edge of dirt container (Diagram 5a).
into round slot on the front handle and turn clockwise until
right side of tool caddy. secure (Diagram 4a).
CORD RELEASE
Turn Quick Cord
Release for easy cord
removal. Store cord in
cord guide (see
Features - pg. 5) to
keep out of the way
while vacuuming.
HEIGHT ADJUST LEVER
lever to match the surface
being cleaned. IMPOR-
TANT: FOR EASIEST
ADJUSTMENT, PLACE
CLEANER IN FULL
rn
UPRIGHT POSITION.