Others; Battery - Doro COMFORT 1010 Manual

Intercom / internal call
1. Press .
2. Enter call number 1 - 5 for the desired handset or press 9 for all.
A tone will be heard if an external call comes in while an internal call is
in progress. End the internal call with L and then answer the external
call with q.
Transferring calls/conference between handsets
When an external call is connected;
1. Press .
Select INTERCOM. Press OK.
2.
If using more than 2 handsets: Enter call number 1 - 5 for the desired
handset or press 9 for all.
3. To transfer: press L,
for conference: press and hold * .

Battery

CAUTION
Risk of explosion if battery is replaced by an incorrect type. Use only original
batteries. The use of non-original batteries may be dangerous and may invalidate
the phone's guarantee.
When the batteries are relatively new they will last for approximately 100 hours
standby time or approximately 10 hours call time. Full battery capacity will not
be reached until the batteries have been charged 4–5 times. It is not possible
to overcharge or damage the batteries by charging them for too long. It may
take up to 10 minutes charging before display illuminates, if batteries are
totally empty.
When the batteries are running low,
heard when a call is in progress. The warning tone is optional, see
settings (HS SETTINGS), p. 5
will flash as long as the handset is charging. In order to save the batteries, the
display is very dark on standby, press L once to illuminate. To save power,
speaker and the display light ceases to operate at low battery strength. When
the battery is low or when there is too great a distance to the base unit the
phone will be unable to connect to a line. Do not place the base unit close to
English

Others

will flash and a warning tone will be
. The battery charge indicator
7
Handset
in the display