Installation; Unpacking; Connection - Doro 840 Manual

English

Unpacking

The package contains:
- Handset
- Base unit
- 2 NiMH rechargeable batteries
Models with extra handset (+1) also include an additional handset, batteries, charger
and adapter.
IMPORTANT!
Only use with the supplied power adapter/s. Connect correct adapter according to indication.

Connection

1. Connect the mains adapter to the
electrical wall socket.
2. Carefully remove the battery cover from the back of the handset by inserting
a small item into the hole in the bottom of the handset. Insert the batteries
ensuring correct battery polarity is observed. Replace the battery cover.
3. Place the handset in the base unit, with the keypad facing outwards. Once the
handset is correctly positioned in the base unit, a beep will be heard.
4. Charge the handset batteries for 24 hours initially (thereafter fully discharged
batteries will take 10 hours to recharge).
5. ONCE CHARGED, connect the line cord to the socket marked
unit and then to a telephone network wall socket.
6. A click will be heard when the modular plug is correctly connected.
New Zealand Purchasers
Before use please change the Recall (R) button timing to setting 2 (600ms) as
described on page 19. This will ensure correct operation of additional network
services such as "Call Waiting".
4

Installation

- Mains adapter
- Line cord
- Guarantee Card (AU & NZ only)
socket on the base unit and to an
y
on the base
T
www.doro.com