Caller Identification - Doro 840 Manual

Explanation of Caller ID
Caller ID allows you to see who is calling before you answer a call, and see who
has called in your absence. If a name is attached to the telephone number and
stored in the phone book, the name will be displayed.
The call log will store up to 30 telephone numbers. When the log is full the
oldest number will be deleted automatically, as the new call is logged.
In standby new calls are highlighted with a flashing
scrolling answered calls are indicated by
ID log the start/end of the list will be indicated be a long beep.
Please note!
In order for numbers to be shown, you must subscribe to the Caller ID service provided by
your network operator and a current subscription in place. Contact your operator for more
information.
CID on Call Waiting
While on a call and another call comes in the display will show only the second callers name
(if stored in the phone book or sent by the network operator). If the callers name is not stored
in the phone book or sent by the net work the display will show
network operator sends the name MOBILE when the call is from a mobile network, in this
case it will be necessary to press the
Retrieving and Dialling Incoming Numbers.
1. Press
2. Scroll /
{ }
the call was logged will now be displayed.
3. Press to dial the displayed number, or press and hold x to return to
q
standby mode.
Messages
Besides showing telephone numbers, the display may also show a number of
messages.
UNAVAILABLE
WITHHELD
MOBILE.
www.doro.com

Caller Identification

to see the number of the second caller.
0
to the required telephone number. Press
It is an International call or a call from a PBX (no
information received)
Information on the number is blocked. The call could
also be from a PBX.
Transmitted by the network operator instead of the
caller name.
in the display
. While scrolling through the Caller
. In some countries the
the time and date
0
English
, when
11