Cleaning The Motorcycle; Storing The Bike Away; Important Notes - Ducati SUPERSPORT Owner's Manual

Hide thumbs Also See for SUPERSPORT:
Table of Contents

Advertisement

Cleaning the motorcycle

To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in.
Use specific products only. Prefer biodegradable
products. Avoid aggressive detergents or solvents.
Important
Do not wash your motorcycle right after use. When
the motorcycle is still hot, water drops will evaporate
faster and spot hot surfaces.
Do not use high pressure water jets.
Never aim the nozzle direct at wheel bearings, front fork
seals, electric items, air inlets or exhaust pipe ends.
If needed, clean off stubborn dirt or exceeding grease
from engine parts using a degreasing agent. Be sure to
avoid contact with drive parts (chain, sprockets, etc.).
Rinse with warm water and dry all surfaces with chamois
leather.
Warning
Braking performance may be impaired immediately
after washing the motorcycle.
Never grease or lubricate the brake discs. Loss of braking
and further accidents may occur. Clean the discs with an
oil-free solvent.

Storing the bike away

If the motorcycle is to be left unridden over long periods,
it is advisable to carry out the following operations before
storing it away:
clean the motorcycle;
remove tank drain plug and seal and drain all fuel from
tank;
pour a few drops of engine oil into the cylinders through
the spark plug seats, then crank the engine by hand a
few times so a protective film of oil will spread on
cylinder inner walls;
place motorcycle on the supplied paddock stand;
remove the battery and keep it well charged and
efficient. Battery should be checked and charged
whenever the motorcycle has been left unridden for over
a month;
protect the motorcycle with a suitable canvas that will
protect paintwork and let condensate breathe out. A
special canvas cover is available from Ducati Spare Parts
Department.

Important notes

Some countries, such as France, Germany, Great Britain,
Switzerland, etc. have compulsory emission and noise
standards that include mandatory inspections at regular
intervals.
It is the Owner's responsibility to have any parts not in
compliance with the standards in force in his/her country
replaced with spare parts complying with local law.
E
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents