Ducati SPORT TOURING Owner's Manual page 60

Turn indicators
The bulbs of the turn indicators are accessible after
UP
removing the instrument panel side guards.
Front:
Turn the bulb holder (1, fig. 68) anticlockwise and remove
it from indicator body. Withdraw the burnt-out bulb and
CLOSED
replace it.
Refit the bulb holder with the round slot pointing upward
and turn it clockwise until it locks in place in the indicator
E
OPEN
body.
DOWN
1
fig. 68
Rear:
remove the screw (2, fig. 69) and detach the glass (3)
2
from the indicator body holder.
A
The bulb is of the banjo-type: press and rotate anti-
clockwise to remove; fit the spare bulb by pressing and
turning clockwise until it clicks. 3
Refit the glass sliding the small tab (A) into the suitable
slot in the indicator body holder and tighten the screw
(2).
fig. 69
60