General Inverter Features - Wh2000I Series - Westinghouse WH2000i Series Owner's Manual

gEnEral invErtEr FEaturEs – wH2000i sEriEs
9
1 - Control Panel: Contains the reset breaker,
outlets and warning lights.
2 - Choke knob: Pull out to the ON position
to start the engine, and push in to the OFF
position once the engine is running.
3 - Recoil Handle: Pull to start the engine.
4 - Engine/Fuel Control Switch: Turns the
engine and the fuel on and off.
5 - Spark Plug Access Cover: Remove the
cover to service the spark plug.
1
8
7
2
Figure 9
6 - Engine Oil Fill/Drain Plug Service Panel:
Remove the panel to access the engine oil fill/
drain plug for maintenance.
7 - Engine Service Panel: Remove the panel to
access the engine for maintenance.
8 - Fuel Cap and Vent: Open vent to run the engine,
and close the vent when the engine is off.
9 - Muffler and Spark Arrestor: Avoid contact until
the engine is cooled down. The spark arrestor
prevents sparks from exiting the muffler. It must
be removed for servicing.
FEATURES
3
4
5
6
19